Gas Logs For use in gas fireplaces. Use a finishing nail or a small piece of plastic shaped like a 'V' to remove excess adhesive at joints. Avoid unnecessary contact of exposed faces of components with objects that may scratch or scuff surfaces.
Carry components on edge and store in original packaging at room temperature. Ensure the marked centerlines of the mantel and overmantel are in alignment. Install your Facing Header and Optional Riser Apply adhesive on the back of the header and place into position.
Install mantel shelf last. Fill screw holes with paintable latex caulk and tool to a smooth finish.
You will need the following tools and materials to build your mantel:. Live Help.
We listen to our clients and we've noticed which designs are popular choices. The bottom edge may also be cut if a height adjustment is required. Components may be secured using a high-strength construction adhesive that is suitable for plaster or masonry material and potentially high temperature application.
Apply Construction Adhesive. If you are using a riser panel, simply cut the panel to fit between the two facing legs, apply adhesive and place into position.
Brace facing panel legs securely until the adhesive sets. Cut the riser panel so that it fits snug between the facing panel legs. Omega also accommodates any arched firebox, offering a smooth seamless architectural masterpiece. Mantel components are ideally applied to solid, stable, flat and level substrates such as plaster or drywall.
Live Help. Screw Hole and Seam Repair Mix a small amount of the facing powder provided with a few ounces of the white liquid to create a workable paste peanut butter consistency. Custom One Piece facing will simply fit over your firebox opening. Finishing If required, fill any gaps around the mantel with a paintable latex caulk.
Gas Fireplaces. Gas Logs For use in gas fireplaces. Use bracing to secure the overmantel tight to the wall until the adhesive sets. New York: