Add some grease to the threads of the lock-ring then tighten to secure the cog set. A bicycle mechanic is working on the rear end of a bike. If you have v-brakes or center-pull brakes, release them.
A single speed bike requires you to exert more effort and physical strength to accomplish various courses and routes. Setting Up the Cog Set.
How to Overhaul Wheel Bearings. Put the chain on the bike and then position it in the center of the rear cog. Install the rear derailleur to the frame and then lead the shifter to the cable slot of the rear derailleur. Step 3. Loosen the lock-ring of the cog set to take out the rear-wheel fixed-gear cog.
Step 2. You can invest in equipment to change your fixed-speed ride into a multi-gear unit yourself.
Put the shifter pod on the handlebars and then secure it by applying the grip. Position your bike upside down or place it on a bike stand. Ensure that all the parts are working perfectly. Try shifting between gears while biking on flat and irregular surfaces. Also check that the wheel bearings are well-maintained and in good condition. Remove the chain and then let the rear tire deflate completely.
Take the new variable-speed cog and align it with the splines on the hub. Warning Ensure that all the parts are working perfectly.
Step 1. Fix the shifter cable neatly along the bike frame leading to the rear axle. Livestrong Sports and Fitness Sports Cycling. You should conveniently push and install the cog set on the wall of the hub.
Scooter Underground: Remove the rear wheel by loosening the quick-release lever or using an Allen wrench to loosen the nuts on the axle. Step 4. Preparing the Bike for Installation.